Product Specifications / Features
Shanghai beverage concentration and purification equipment,
Shanghai juice concentration and purification equipment, Shanghai
concentration and separation equipment
Membrane component, this kind of membrane is the flatbed
cylindroid, horizontal type, which is lapped assembly of cylindroid
membrane support panel(there is the stream guidance on the surface
of panel) cylindroid membrane, there also will be the stainless
steel before and after end-cover, clamped by the side tie rod
closely. This kind of membrane is designed and manufactured on the
basis of plate frame. This kind of structure is very successful
with the thin channel, tangential flow.
Advantages of plate type:
Thin channel will increase the contact area of feed liquor and
membrane, improve the filtration efficiency
Tangential flow is the best way to prevent the filtration rate from
Inner volume is small, it is beneficial to the small batch and fast
Suitable for high viscosity and high density feed liquor
Every couple of membrane have the independent outlet of filtrate,
once the membrane is destroyed, it is very easy to be checked.
According to the requirements of output, we can increase or
decrease the number of membrane freely.
We just need to change the membrane, all the panel will be used
more than 10 years.
We can change the membrane of different performances.
We can replace the single membrane.
Outside diameter of tangential membrane: 410×300 mm
Min. membrane area: 0.15㎡
Max. working pressure: 0.8MPa
Suitable working temperature: 5~55℃
PH range: 1~14
Filtration rate: 15~30L/㎡·h
Molecular weight intercepted: 2000~200000MW
Total power consumption: 0.5kW/㎡
Well and High Quality Control ,
New Product ,